Basic Automatic Washing Machine All Error Codes

Basic Automatic Washing Machine All Error Codes

by admin

Here are all the error codes for Basic Automatic Washing Machines. All error codes detail washing machine models and types.

 

Basic Top Load Washing Machine All Error Codes 

 

BAWMT-N07WS All Error Codes Troubleshooting

E1 – Water Inlet Problem

  1. Check if the water tap is open or closed or if there is the proper water pressure in the water tap.
  2. Check the water inlet motor.
  3. Check PCB

E2 – Water Drainage Problem

  1. Check if there is any blockage in the drain pipe.
  2. Check the water pump.
  3. Check PCB.

E3 – Door Lock / Door Open 

  1. Check if the door is properly closed or not.
  2. Check door safety switch/door lock
  3. Check PCB.

E4 – Drum Disbalanced / Clothes on one side

  1. Check if the machine is balanced well on the floor.
  2. Check for clothes if the load is on one side of the tub.
  3. Check the Safety switch of the drum.
  4. Check PCB.

 

 

BAWMT-N08WS All Error Codes Troubleshooting

E1 – Water Inlet Problem

  1. Check if the water tap is open or closed or if there is the proper water pressure in the water tap.
  2. Check the water inlet motor.
  3. Check PCB

E2 – Water Drainage Problem

  1. Check if is there any blockage in the drain pipe.
  2. Check the water pump.
  3. Check PCB.

E3 – Door Lock / Door Open 

  1. Check if the door is properly closed or not.
  2. Check door safety switch/door lock
  3. Check PCB.

E4 – Drum Disbalanced / Clothes on one side

  1. Check if the machine is balanced well on the floor.
  2. Check for clothes if the load is on one side of the tub.
  3. Check the Safety switch of the drum.
  4. Check PCB.

 

 

BAWMT-N10WS All Error Codes Troubleshooting

E1 – Water Inlet Problem

  1. Check if the water tap is open or closed or if there is the proper water pressure in the water tap.
  2. Check the water inlet motor.
  3. Check PCB

E2 – Water Drainage Problem

  1. Check if is there any blockage in the drain pipe.
  2. Check the water pump.
  3. Check PCB.

E3 – Door Lock / Door Open 

  1. Check if the door is properly closed or not.
  2. Check door safety switch/door lock
  3. Check PCB.

E4 – Drum Disbalanced / Clothes on one side

  1. Check if the machine is balanced well on the floor.
  2. Check for clothes if the load is on one side of the tub.
  3. Check the Safety switch of the drum.
  4. Check PCB.

 

 

BAWMT-N12WS All Error Codes Troubleshooting

E1 – Water Inlet Problem

  1. Check if the water tap is open or closed or if there is the proper water pressure in the water tap.
  2. Check the water inlet motor.
  3. Check PCB

E2 – Water Drainage Problem

  1. Check if is there any blockage in the drain pipe.
  2. Check the water pump.
  3. Check PCB.

E3 – Door Lock / Door Open 

  1. Check if the door is properly closed or not.
  2. Check door safety switch/door lock
  3. Check PCB.

E4 – Drum Disbalanced / Clothes on one side

  1. Check if the machine is balanced well on the floor.
  2. Check for clothes if the load is on one side of the tub.
  3. Check the Safety switch of the drum.
  4. Check PCB.

 

 

BAWMT-N14WS All Error Codes Troubleshooting

E1 – Water Inlet Problem

  1. Check if the water tap is open or closed or if there is the proper water pressure in the water tap.
  2. Check the water inlet motor.
  3. Check PCB

E2 – Water Drainage Problem

  1. Check if there is any blockage in the drain pipe.
  2. Check the water pump.
  3. Check PCB.

E3 – Door Lock / Door Open 

  1. Check if the door is properly closed or not.
  2. Check door safety switch/door lock
  3. Check PCB.

E4 – Drum Disbalanced / Clothes on one side

  1. Check if the machine is balanced well on the floor.
  2. Check for clothes if the load is on one side of the tub.
  3. Check the Safety switch of the drum.
  4. Check PCB.

 

 

BAWMT-N16WS All Error Codes Troubleshooting

E1 – Water Inlet Problem

  1. Check if the water tap is open or closed or if there is the proper water pressure in the water tap.
  2. Check the water inlet motor.
  3. Check PCB

E2 – Water Drainage Problem

  1. Check if there is any blockage in the drain pipe.
  2. Check the water pump.
  3. Check PCB.

E3 – Door Lock / Door Open 

  1. Check if the door is properly closed or not.
  2. Check door safety switch/door lock
  3. Check PCB.

E4 – Drum Disbalanced / Clothes on one side

  1. Check if the machine is balanced well on the floor.
  2. Check for clothes if the load is on one side of the tub.
  3. Check the Safety switch of the drum.
  4. Check PCB.

 

BAWMT-H09W All Error Codes Troubleshooting

E1 – Door Lock / Door Open 

  1. Check if the door is properly closed or not.
  2. Check door safety switch/door lock
  3. Check PCB.

UN – Drum Disbalanced / Clothes on one side

  1. Check if the machine is balanced well on the floor.
  2. Check for clothes if the load is on one side of the tub.
  3. Check the Safety switch of the drum.
  4. Check PCB.

E3 – Water Drainage Problem

  1. Check if there is here any blockage in the drain pipe.
  2. Check the water pump.
  3. Check PCB.

E4 – Water Inlet Problem

  1. Check if the water tap is open or closed or if there is the proper water pressure in the water tap.
  2. Check the water inlet motor.
  3. Check PCB

E5 – Water Level Sensor

  1. Check the water level sensor.
  2. Check the hose of the water level sensor.
  3. Check PCB.

E8 – Reach the Over Flow Water Level

  1. in case of an overflow alarm in the first two times, automatically drain water below the set water level to eliminate alarms; For the third time, it is necessary to eliminate through the manual shutdown.

 

 

BAWMT-H11W All Error Codes Troubleshooting

E1 – Door Lock / Door Open 

  1. Check if the door is properly closed or not.
  2. Check door safety switch/door lock
  3. Check PCB.

UN – Drum Disbalanced / Clothes on one side

  1. Check if the machine is balanced well on the floor.
  2. Check for clothes if the load is on one side of the tub.
  3. Check the Safety switch of the drum.
  4. Check PCB.

E3 – Water Drainage Problem

  1. There is here no blockage in the drain pipe.
  2. Check the water pump.
  3. Check PCB.

E4 – Water Inlet Problem

  1. Check if the water tap is open or closed or if there is the proper water pressure in the water tap.
  2. Check the water inlet motor.
  3. Check PCB

E5 – Water Level Sensor

  1. Check the water level sensor.
  2. Check the hose of the water level sensor.
  3. Check PCB.

E8 – Reach the Over Flow Water Level

  1. in case of an overflow alarm in the first two times, automatically drain water below the set water level to eliminate alarms; For the third time, it is necessary to eliminate through manual shutdown.

 

 

BAWMT-ML11S All Error Codes Troubleshooting

 

E1 – Spinning Does Not Work

  1. Is the laundry spread out evenly in the washer?
  2. Is the washer installed on a sturdy and flat surface?

If the washer does not spin, a buzzer will sound, and the digital tub will show “E1”.

E2 – Water Is Not Supply

  1. Is the water tap opened?
  2. Is the water supply cut off?
  3. Is the water supply hose frozen?
  4. Is the water supply hose or hose connection filter clogged?
  5. Is the water inlet timeout?
  6. Is the pressure of water supply too lower?

If water is not supply, a buzzer will sound, and the digital tub will show “E2”.

E2 – Water Does Not Drain

  1. Is the drain hose down? (No pump)
  2. Is the drain hose frozen?
  3. Is the drain hose clogged?
  4. Is the height of the end of the drain hose over 15cm?(No pump)

If water does not drain, a buzzer will sound, and the digital tub will show “E3”.

 

E4 – Door Sensor Problem

  1. Close the door properly and press the Start Button Again.
  2. Change the door sensor. 

 

EL – Washing machine won’t work or does not drain

  1. Is the CHILD-LOCK function set and the lid open?

If the CHILD-LOCK function is set and the lid is open, the washer won’t work or does not drain, a buzzer will sound, and the digital tub will show “EL”.

 

“EA” or “EC” Error Code

If the digital tub shows “EA” or “EC”, Please press the POWER button, cut off power, pull off the power plug. call service agency immediately.

 

 

Basic Front Load Washing Machine All Error Code

 

BAWMDF-M08W All Error Codes Troubleshooting

E02 – No Inlet Water

  • Check whether the faucet is turned on. Whether the water supply is cut off? Are the mesh filters in the water inlet hose and valve blocked? and whether the water inlet hose of the appliance is frozen. Eliminate the above fault causes. Please contact the service centre for repair if the fault code still exists.

E03 – Abnormal Water Drainage 

  • Clean the pump filter.
  • Abnormal water drainage
  • Check whether the drain hose is bent, twisted, or blocked. Eliminate the above fault causes. Please contact the service centre for repair if the fault code still exists.

U4 – Door Lock Malfunction

  • The door is not closed, and the lock does not work normally. Close the door again, turn the wash cycle selector knob to switch the machine off while the light under the symbol POWER is lit, and then turn the wash cycle selector knob to select any wash program and press the START/PAUSE button to restart the program. Eliminate these fault causes.
  • If the fault code still exists, please contact the service centre for repair. If the fault code displays and cannot open the door, the door lock may be a failure, please contact the service centre for repair.

H – The Temperature in the Drum is high

  • Press the START/PAUSE button to suspend the appliance operation and wait for several minutes. When the temperature in the drum drops to a safe range and the fault code on the display is removed, press the START/PAUSE button to continue the rest of the program. If the fault code still exists, please contact the service centre for repair.

EXX – Other Fault

  • Press the power button to turn off the power supply, unplug the power cord, and contact the service centre for repair as soon as possible.

 

BAWMDF-MB10S All Error Codes Troubleshooting

E02 – No Inlet Water

  1. Check whether the faucet is turned on. Whether the water supply is cut off? Are the mesh filters in the water inlet hose and the Water Inlet Valve blocked? and whether the water inlet hose of the appliance is frozen. Eliminate the above fault causes. Please contact the service center for repair if the fault code still exists.

E03 – Abnormal Water Drainage 

  1. Clean the pump filter.
  2. Abnormal water drainage
  3. Check whether the drain hose is bent, twisted, or blocked. Eliminate the above fault causes. Please contact the service center for repair if the fault code still exists.

U4 – Door Lock Malfunction

  1. The door is not closed, and the lock does not work normally. Close the door again, turn the wash cycle selector knob to switch the machine off while the light under the symbol POWER is lit, and then turn the wash cycle selector knob to select any wash program and press the START/PAUSE button to restart the program. Eliminate these fault causes.
  2. If the fault code still exists, please contact the service center for repair. If the fault code displays and cannot open the door, the door lock may be a failure, please contact the service center for repair.

H – The Temperature in the Drum is high

  1. Press the START/PAUSE button to suspend the appliance operation and wait for several minutes. When the temperature in the drum drops to a safe range and the fault code on the display is removed, press the START/PAUSE button to continue the rest of the program. If the fault code still exists, please contact the service center for repair.

H0 – Dryer not Working (No Heating)

  1. Check the overload of the heater
  2. Check if the heater Fan working or not
  3. Open & Clean the heater housing
  4. Change PCB

FXXX – The Negative ion concentration in the drum is high

  1. Press the START/PAUSE button to suspend the washing machine operation and wait for several minutes. When the negative ion concentration in the drum drops to a safe range and the fault code on the display is removed, press the START/PAUSED button to continue the rest of the program.

EXX – Other Fault

  1. Turn the wash cycle selector knob to switch the machine off while the light under the symbol is lit, unplug the power cord, and contact the service center for repair as soon as possible.

 

 

Fisher Automatic Washing Machine Error Codes

 

 

Leave a Reply

Releated

How to Fix H 85 Error in Panasonic Air Conditioner?

How to Fix H 85 Error in Panasonic Air Conditioner?

If your Panasonic Air Conditioner displays an H85 error, it means there’s a communication issue between the indoor unit and the wireless LAN module. We are here with a guide on quickly fixing this common problem. Simple Steps to Fix the H85 Error Check Connections: Inspect the connections between the indoor unit and the wireless […]

by admin
Fisher Automatic Washing Machine All Error Codes

Fisher Automatic Washing Machine All Error Codes

Here are all the error codes for Fisher Automatic Washing Machines. All error codes detail washing machine models and types.   Fisher Top Load Washing Machine Error Codes   FAWMT-E07SBN All Error Codes Troubleshooting E1 – Water Inlet Problem Check if the water tap is open or closed or if there is the proper water pressure in […]

by admin